Harkers Duramitex Plus. Duramitex Plus is a completely safe and pesticide free treatment for the eradication of red mites in pigeon lofts and aviaries. Duramitex Plus spray is an effective treatment in helping to clear red mite in pigeon lofts.
Duramitex Plus is a completely safe and pesticide free treatment for the eradication of red mites in pigeon lofts and aviaries.
Application should be sprayed liberally around the area to be treated – paying particular attention to cracks and crevices.
A inchSticky trap” is literally formed which immediately immobilises the adult mite and prevents other life stage from developing breaking the life cycle.
Regular 6-8 weekly use will prevent the return of red mite and all other small insects pests.
All airborne allergens will be eliminated by coating the mite.
It is safe to use with birds still in situ.
Available is available in a 500ml ready to use spray.
Contain a combination of silicones.
Usage
Shake well before use. Direct nozzle approximately 30cm (1foot) from the surface to be treated and away from your body. Pump the trigger and using a sweeping motion to ensure uniform coverage of the surface apply until run off. Pay special attention to cracks crevices and joints in walls and flooring. Ensure these areas are soaked in Duramitex™ Plus. Wash hands after use.
Slightly darker areas may be observed on treated surfaces. This is normal and will disappear as the product dries off completely. Hard non porous surfaces should not normally require treatment. If sprayed these surfaces will appear wet for approximately 30 minutes after treatment and may present a slip hazard until dry.
Precautions
Keep away from food and drink. Avoid eye contact. If your eyes are accidentally affected flush with plenty of clean water. Seek medical advice if irritation persists. Not for use on animals. Do not inhale. Due to the oily nature of the ingredients some surfaces could be slightly slippery before they dry. Take necessary precautions if this is the case. Duramitex™ Plus Can be used on most surfaces. However before you use on large surfaces or potentially delicate fabrics we recommend that you test a small out of sight area to check the suitability of the product with the material.
